Vanderbilt SPC4 Series Installation & Configuration Manual page 270

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
1. Select Configuration > System > Standards.
The following page will be displayed.
2. Configure the fields as described in the following table.
Continent
Installation
Type
Region
Compliance
Grade
© Vanderbilt 2018
Select the appropriate location for the installation. Options are Europe, Asia,
North America, South America, or Oceania.
Select the type of installation. Options are Domestic, Commercial or Financial.
To change the region on your panel, it is strongly recommended that you default
your panel and select a new region as part of the start up wizard. Select the
region in which the installation is installed and the regional requirements it
complies with.
Some selections will implement local or national requirements which supersede
EN50131 requirements. The options in the Grade area will change depending on
your selection in the Region Compliance area.
Options are UK, Ireland, Europe General (EN), Italy, Sweden, Switzerland,
Belgium, Spain, Germany (VDS), France, Norway, Denmark, Poland,
Netherlands, Finland, Portugal, and Czech Republic.
Select the Security Grade that applies to the installation.
The options in the Grade area will change depending on your selection in the
Region Compliance area.
270
Engineer programming via the browser
A6V10276959-d
12.09.2018