Vanderbilt SPC4 Series Installation & Configuration Manual page 289

SPC4xxx/5xxx/6xxx – Installation & Configuration Manual
3. Click Save and then Back.
4. Select the desired week type from the drop down menu for each of the required scheduled weeks
in the calendar.
5. Click Save.
6. Click Back.
See also
Automatic setting/unsetting of areas on the next page
Automatic setting/unsetting of other panel operations on the next page
Exceptions
Exceptions or exception days are used to configure automatic setting schedules for exceptional
circumstances outside of the normal weekly schedules defined in the calendars. Exceptions are
defined with a start and end date (day/month/year) and up to four on/off timing periods for different panel
operations including automatic setting/unsetting of areas or the switching on/off of triggers or outputs.
A maximum of 64 exceptions can be configured on the system.
Exceptions are generic entities that can be assigned to one or more calendars. When an exception is
assigned to a calendar, the exception settings override any calendar configuration for that start and end
date period with both dates inclusive.
Configuring Exception Days
1. Select Configuration > Calendars > Exception Days > Add.
The following page will be displayed.
2. Configure the fields as described in the table below.
Description Enter a name for the exception (16 characters max).
Start
Date/End
Date
On
Time/Off
Time
Calendars
© Vanderbilt 2018
Select the start and end date.
Select the desired times for setting/unsetting or for triggers. Use time
guidelines for Automatic Setting/Unsetting of Areas (see Automatic
setting/unsetting of areas on the next page), or for Automatic
Setting/Unsetting of other Panel Operations (see Automatic setting/unsetting
of other panel operations on the next page).
Select the desired calendar(s) for effect.
289
Engineer programming via the browser
A6V10276959-d
12.09.2018