Air Cleaner - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

2. Air Cleaner

1) Loosen clamp (A), and separate air cleaner

upper cover from air intake boot.

2) Remove the clip (B) above the air cleaner upper

3) Remove air cleaner element.

4) Remove air cleaner lower case.

B: INSTALLATION

1) Install the air cleaner lower case.

Tightening torque:

32.3 N·m (3.3 kgf-m, 23.9 ft-lb)

2) Set the air cleaner element.

3) Install the air cleaner upper cover.

Before installing air cleaner upper cover, align

holes with protruding portions of air cleaner

lower case, then secure upper cover to lower

4) Install the clip (B) above the air cleaner upper

5) Tighten clamp (A), and connect air intake boot

and air cleaner upper cover.

C: INSPECTION

Replace if excessively damaged or dirty.

Intake (Induction)

Table of Contents