Fuel Filter - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

Fuel Injection (Fuel Systems)

26. Fuel Filter

¼ Place "NO FIRE" signs near the working

¼ Be careful not to spill fuel on the floor.

Fuel filter is built in fuel pump assembly.

1) Release fuel pressure. <Ref. to FU(H6)-50,

OPERATION, Fuel.>

2) Remove fuel pump assembly. <Ref. to FU(H6)-

64, REMOVAL, Fuel Pump.>

3) Disconnect ground cable from filter holder.

4) Remove filter holder by turning it to the left from

the body pawls and take out the filter.

B: INSTALLATION

¼ If fuel hoses are damaged at the connecting

portion, replace it with a new one.

¼ If clamps are badly damaged, replace with

¼ Replace O-ring with new ones.

1) Set O-ring on the filter holder and install by

turning to the right.

2) Install fuel pump assembly. <Ref. to FU(H6)-65,

INSTALLATION, Fuel pump.>

C: INSPECTION

1) Check the inside of fuel filter for dirt and water

2) If it is clogged, or if replacement interval has

been reached, replace it.

Table of Contents