Subaru Legacy 2002 Service Manual page 1053

Mechanical
18) Remove nuts which install front cushion rub-
ber onto front crossmember.
19) Separate torque converter clutch from drive
plate.
(1) Lower the vehicle.
(2) Remove service hole plug (A).
(3) Remove bolts which hold torque converter
clutch to drive plate.
(4) Remove other bolts while rotating the
engine using ST.
ST 499977100 CRANK PULLEY WRENCH
ENGINE ASSEMBLY
20) Remove pitching stopper.
B2M4022
21) Disconnect fuel delivery hose, return hose and
evaporation hose.
CAUTION:
¼ Disconnect hose with its end wrapped with
cloth to prevent fuel from splashing.
¼ Catch fuel from hose into container.
22) Support engine with a lifting device and wire
ropes.
B2M4322A
ME(H6)-32
B2M4323
B2M4023
B2M4024