Subaru Legacy 2002 Service Manual page 1056

(2) Install power steering pump on bracket, and
tighten bolts.
Tightening torque:
20.1 N·m (2.05 kgf-m, 14.8 ft-lb)
(3) Tighten bolt which installs power steering
pipe bracket.
11) Tighten nuts which hold lower side of trans-
mission to engine.
Tightening torque:
50 N·m (5.1 kgf-m, 36.9 ft-lb)
ENGINE ASSEMBLY
12) Tighten nuts which install front cushion rubber
onto crossmember.
Tightening torque:
74 N·m (7.5 kgf-m, 54 ft-lb)
CAUTION:
Make sure the front cushion rubber mounting
bolts (A) and locator (B) are securely installed.
B2M4021
13) Install front exhaust pipe.
<Ref. to EX(H6)-6, INSTALLATION, Front Exhaust
Pipe.>
14) Connect the following hoses.
(1) Fuel delivery hose, return hose and evapo-
ration hose
B2M4020
(2) Heater inlet and outlet hoses
B3M2048
ME(H6)-35
Mechanical
B2M4025A
B2M4023
B2M4019