Camshaft Position Sensor - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

6. Camshaft Position Sensor

1) Disconnect battery ground cable.

2) Remove air cleaner.

<Ref. to IN(H6)-5, REMOVAL, Air Cleaner.>

3) Remove ground cable from fuel pipe protector

4) Remove fuel pipe protector RH.

5) Disconnect connector from camshaft position

CAMSHAFT POSITION SENSOR

6) Remove camshaft position sensor.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

¼ Camshaft position sensor;

6.4 N·m (0.65 kgf-m, 4.7 ft-lb)

¼ Fuel pipe protector RH;

19 N·m (1.9 kgf-m, 14 ft-lb)

Fuel Injection (Fuel Systems)

Table of Contents