Subaru Legacy 2002 Service Manual page 949

Fuel Injection (Fuel Systems)
21) Install washer tank on body.
22) Connect accelerator cable (A).
23) Connect cruise control cable (B). (With cruise
control models)
24) Install air intake duct, air cleaner and air intake
chamber. <Ref. to IN(H6)-7, INSTALLATION, Air
Intake Duct.> and
INSTALLATION, Air Cleaner.> and <Ref. to
IN(H6)-6, INSTALLATION, Air Intake Chamber.>
25) Connect connector to fuel pump relay.
INTAKE MANIFOLD
B2M3139
B2M4480A
<Ref. to IN(H6)-5,
B2M3159
FU(H6)-24
26) Connect battery ground cable.
C: DISASSEMBLY
1) Disconnect connectors from throttle position
sensor.
2) Disconnect connectors from intake manifold
pressure sensor (B) and idle air control solenoid
valve (A).
3) Disconnect air by-pass hose (C) from idle air
control solenoid valve.
G6M0095
S145034A06
B2M4482
B2M4481A