Engine Assembly - Subaru Legacy 2002 Service Manual

Mechanical

7. Engine Assembly

A: REMOVAL
S143079A18
1) Set the vehicle on lift arms.
2) Open front hood fully and support with stay.
3) Raise rear seat, and turn floor mat up.
4) Release fuel pressure. <Ref. to FU(H6)-50,
RELEASING OF
OPERATION, Fuel.>
5) Remove filler cap.
6) Disconnect battery ground cable.
7) Remove air intake duct, air cleaner case and air
intake chamber.
<Ref. to IN(H6)-7, REMOVAL, Air Intake Duct.>,
<Ref. to IN(H6)-6, REMOVAL, Air Intake Cham-
ber.> and <Ref. to IN(H6)-5, REMOVAL, Air
Cleaner.>
8) Lift up the vehicle.
9) Remove under cover.
10) Remove radiator from vehicle. <Ref. to
CO(H6)-23, REMOVAL, Radiator.>
11) Remove V-belt.
REMOVAL, V-belt.>
12) Disconnect A/C pressure hoses from A/C
compressor. <Ref. to AC-42, REMOVAL, Flexible
Hose.>
13) Disconnect the following connectors and
cables.
(1) Engine ground terminal
ENGINE ASSEMBLY
S143079
FUEL PRESSURE,
G6M0095
<Ref. to ME(H6)-29,
B2M4015
ME(H6)-30
(2) Engine harness connectors
(3) Generator connector, terminal and A/C
compressor connector
(A) Generator connector and terminal
(B) A/C compressor connector
(4) Accelerator cable
14) Disconnect the following hoses.
(1) Brake booster vacuum hose
B2M4016
B2M4017A
B2M4018
B2M3419