Subaru Legacy 2002 Service Manual page 1052

(2) Heater inlet outlet hose
15) Remove power steering pump from bracket.
(1) Remove pipe with bracket.
(2) Remove bolts which install power steering
pump bracket.
CAUTION:
Do not separate the hose and the pipe from the
pump body.
(A) Power steering pump
(B) Generator
(C) A/C compressor
ENGINE ASSEMBLY
(3) Remove power steering tank from the
bracket by pulling it upward.
B2M4019
(4) Place power steering pump on the right side
wheel apron.
B2M4020
(A)
16) Remove front exhaust pipe.
<Ref. to EX(H6)-5, REMOVAL, Front Exhaust
Pipe.>
17) Remove nuts which hold lower side of trans-
mission to engine.
B2M4021A
ME(H6)-31
Cloth
Mechanical
B2M3153
B2M4321C
B3M2048