Subaru Legacy 2002 Service Manual page 982

(2) Tighten bolt which holds rear shock
absorber to rear suspension arm. <Ref. to
RS-14, INSTALLATION, Link Upper.>
Tightening torque:
157 N·m (16 kgf-m, 116 ft-lb)
8) Install rear brake caliper. <Ref. to BR-29,
INSTALLATION, Rear Disc Brake Assembly.>
9) Tighten bolt which holds rear brake hoses hold-
ing bracket.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
10) Install parking brake cable to cabin by forcibly
pushing it forward.
FUEL TANK
11) Tighten bolts which hold parking brake cable
holding bracket.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
B2M3189
Tightening torque:
32 N·m (3.3 kgf-m, 23.9 ft-lb)
B2M3196
12) Connect connector to ABS sensor.
13) Install propeller shaft. <Ref. to DS-14,
INSTALLATION, Propeller Shaft.>
14) Install rear exhaust pipe and muffler. <Ref. to
B2M3187
EX(H6)-9, INSTALLATION, Muffler.> and <Ref. to
EX(H6)-8, INSTALLATION, Rear Exhaust Pipe.>
FU(H6)-57
Fuel Injection (Fuel Systems)
B2M3185
B2M3186
B2M3184