Valve Clearance - Subaru Legacy 2002 Service Manual

5. Valve Clearance

A: INSPECTION
CAUTION:
Inspection and adjustment of valve clearance
should be performed while engine is cold.
1) Set the vehicle on the lift.
2) Disconnect battery ground cable.
3) Lift up the vehicle.
4) Remove under cover.
5) Lower the vehicle.
6) Place suitable container under the vehicle.
7) When inspecting RH side cylinder.
(1) Remove air intake duct and air cleaner
case. <Ref. to IN(H6)-7, REMOVAL, Air Intake
Duct.> and <Ref. to IN(H6)-5, REMOVAL, Air
Cleaner.>
(2) Remove V-belt.
REMOVAL, V-belt.>
(3) Remove power steering hose from bracket.
VALVE CLEARANCE
S143083
S143083A10
G6M0095
B2M2920
<Ref. to ME(H6)-29,
B2M4020
ME(H6)-23
(4) Remove bolts which install power steering
pump bracket.
(5) Remove power steering tank from the
bracket by pulling it upward.
(6) Place power steering pump on the right side
wheel apron.
(7) Remove fuel pipe protector RH.
Mechanical
B2M4021
B2M3153
B2M3154
B2M4004