17. Engine Control Module
A: REMOVAL
S145049A18
1) Disconnect battery ground cable.
2) Remove lower inner trim of passenger side.
<Ref. to EI-41, REMOVAL, Lower Inner Trim.>
3) Detach floor mat of front passenger seat.
4) Remove protect cover.
5) Remove nuts which hold ECM to bracket.
ENGINE CONTROL MODULE
6) Remove clip from bracket.
S145049
7) Disconnect ECM connectors and take out
ECM.
G6M0095
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
When replacing ECM, be careful not to use the
wrong spec. ECM to avoid any damage to the
fuel injection system.
B2M0673
B2M3161
B2M3162
FU(H6)-47
Fuel Injection (Fuel Systems)
B2M4527
S145049A11