Subaru Legacy 2002 Service Manual page 946

B: INSTALLATION
1) Install intake manifold onto cylinder heads.
NOTE:
Always use new gaskets.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
2) Install the bolt (B), which holds fuel injector pipe
RH onto cylinder head.
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
3) Connect air assist hose (A).
INTAKE MANIFOLD
S145034A11
B2M4497
B2M4498
B2M4496A
FU(H6)-21
4) Install fuel pipe protector RH.
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
5) Install ground cable to fuel pipe protector RH.
6) Install the bolt (B) which holds fuel injector pipe
RH onto cylinder head.
Tightening torque:
19 N·m (1.9 kgf-m, 14 ft-lb)
7) Connect air assist hose (A).
Fuel Injection (Fuel Systems)
B2M4495
B2M4494
B2M4493A