Subaru Select Monitor - Subaru Legacy 2002 Service Manual

6. Subaru Select Monitor

A: OPERATION
1. HOW TO USE SUBARU SELECT
MONITOR
S038503A1601
1) Prepare Subaru Select Monitor kit.
2) Connect diagnosis cable to Subaru Select
Monitor.
3) Insert cartridge into Subaru Select Monitor.
4) Connect Subaru Select Monitor to data link
connector.
(1) Data link connector located in the lower por-
tion of the instrument panel (on the driver's
side).
(2) Connect diagnosis cable to data link con-
nector.
CAUTION:
Do not connect scan tools except for Subaru
Select Monitor.
SUBARU SELECT MONITOR
S038503
S038503A16
S2M0285
S2M0286A
B2M2960B
EN(w/oOBD)-23
5) Turn ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
6) Using Subaru Select Monitor, call up diagnostic
trouble code(s) and various data, then record
them.
2. READ DIAGNOSTIC TROUBLE CODE
(DTC) FOR ENGINE.
Refer to Read Diagnostic Trouble Code for infor-
mation about how to indicate DTC. <Ref. to EN
(w/oOBD)-26, Read Diagnostic Trouble Code
(DTC).>
Engine (Diagnostics)
S2M0288A
S038503A1602