Fuel Sub Level Sensor - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:
Table of Contents

Advertisement

Fuel Injection (Fuel Systems)

25. Fuel Sub Level Sensor

A: REMOVAL
S145023A18
WARNING:
¼ Place "NO FIRE" signs near the working
area.
¼ Be careful not to spill fuel on the floor.
1) Disconnect battery ground cable.
2) Lift-up the vehicle.
3) Remove front side fuel tank cover.
4) Drain fuel from fuel tank. Set a container under
the vehicle and remove drain plug from fuel tank.
FUEL SUB LEVEL SENSOR
5) Tighten fuel drain plug and install front right side
S145023
fuel tank cover.
Tightening torque:
Tightening torque:
G6M0095
6) Raise rear seat and turn floor mat up. (Wagon
model)
7) Remove rear seat. (Sedan model)
B2M3173
8) Remove service hole cover.
B2M3174
FU(H6)-68
26 N·m (2.65 kgf-m, 19.2 ft-lb)
18 N·m (1.8 kgf-m, 13.0 ft-lb)
B2M3174
B2M3173
B2M3175

Advertisement

Table of Contents
loading

Table of Contents