Subaru Legacy 2002 Service Manual page 1059

Mechanical
9. Preparation for Overhaul
A: REMOVAL
S143091A18
1) Remove engine from body. <Ref. to ME(H6)-
30, REMOVAL, Engine Assembly.>
2) After removing engine from body, install ST
onto engine.
ST 18232AA000 ENGINE STAND
3) Remove sensors, pipes, and hoses installed on
engine before starting overhaul.
(1) Remove intake manifold. <Ref. to FU(H6)-
17, REMOVAL, Intake Manifold.>
(2) Remove generator. <Ref. to SC(H6)-14,
REMOVAL, Generator.>
(3) Remove A/C compressor. <Ref. to AC-35,
REMOVAL, Compressor.>
(4) Remove EGR pipe. <Ref. to EC(H6)-10,
REMOVAL, EGR Valve.>
(5) Remove water pipe and hoses.
(6) Remove engine harness.
(7) Remove spark plugs. <Ref. to IG(H6)-4,
REMOVAL, Spark Plug.>
(8) Remove camshaft position sensor. <Ref. to
FU(H6)-31, REMOVAL, Camshaft Position Sen-
sor.>
(9) Remove crankshaft position sensor. <Ref.
to FU(H6)-30, REMOVAL, Crankshaft Position
Sensor.>
(10) Remove knock sensor. <Ref. to FU(H6)-
32, REMOVAL, Knock Sensor.>
(11) Remove engine coolant temperature sen-
sor. <Ref. to FU(H6)-29, REMOVAL, Engine
Coolant Temperature Sensor.>
(12) Remove oil pressure switch. <Ref. to
LU(H6)-17, REMOVAL, Oil Pressure Switch.>
(13) Remove oil filter. <Ref. to LU(H6)-18,
REMOVAL, Engine Oil Filter.>
(14) Remove oil cooler. <Ref. to LU(H6)-19,
REMOVAL, Oil Cooler.>
PREPARATION FOR OVERHAUL
S143091
B2M4026A
ME(H6)-38