Subaru Legacy 2002 Service Manual page 879

DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
Engine (Diagnostics)
14. Diagnostic Procedure with Diagnostic Trouble Code (DTC)
A: DTC 11 CRANKSHAFT POSITION SENSOR
¼ DIAGNOSIS:
¼ No signal entered from crankshaft position sensor when ignition switch is ON.
¼ The harness connector between ECM and crankshaft position sensor is in short or open.
¼ TROUBLE SYMPTOM:
¼ Engine stalls.
¼ Restarting impossible
CAUTION:
After repair or replacement of faulty parts, conduct CLEAR MEMORY and INSPECTION MODES.
<Ref. to EN(w/oOBD)-30, OPERATION, Clear Memory Mode.> and <Ref. to EN(w/oOBD)-28,
OPERATION, Inspection Mode.>
¼ WIRING DIAGRAM:
S038521G55
EN(w/oOBD)-68
S038521
B2M4728