Crankshaft Pulley - Subaru Legacy 2002 Service Manual

10. Crankshaft Pulley

A: REMOVAL
S143098A18
1) Remove crankshaft pulley cover.
2) Remove crankshaft pulley bolt. To lock
crankshaft, use ST.
ST 49997100 CRANKSHAFT PULLEY
WRENCH
3) Remove crankshaft pulley.
B: INSTALLATION
1) Install crankshaft pulley.
2) Install crankshaft pulley bolt. To lock crankshaft,
use ST.
ST 49997100 CRANKSHAFT PULLEY
WRENCH
(1) Clean the crankshaft pulley thread using an
air gun.
(2) Apply engine oil to the crankshaft pulley bolt
seat and thread.
(3) Tighten the crankshaft pulley bolts.
CRANKSHAFT PULLEY
S143098
B2M4029
B2M4030
S143098A11
ME(H6)-39
Tightening torque:
178 N·m (18.1 kgf-m, 131 ft-lb)
3) Install the crankshaft pulley cover.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
C: INSPECTION
1) Check crankshaft pulley cover for oil leaks and
bleeding.
2) Check crankshaft pulley for looseness.
Mechanical
B2M4030
B2M4029
S143098A10