Security; Configuring Security Options - Polycom QDX 6000 Administrator's Manual

Security

Configuring Security Options

To set passwords and security options:
1
2
Setting
Security Mode
Use Room
Password for
Remote Access
Room Password
Remote Access
Password
Go to System > Admin Settings > General Settings > Security.
Configure these settings on the Security screen:
Description
Specifies whether the system uses Security Mode, which
prevents unsecured access to the system. Every time you
enable Security Mode, you must configure a new password
for the system.
Specifies whether the room password and remote access
password are the same.
Enter or change the room password. When the room
password is set, you must enter it to configure the system
Admin Settings using the remote control. The room password
must not contain spaces.
Enter or change the remote access password. When the
remote access password is set, you must enter it to upgrade
the software or manage the system from a computer. The
remote access password must not contain spaces.
8
8-1