Inspection Procedure: P1601; Check The Injector Replaced Record; Check The Qr Code 1 (Hino Dx Ⅱ) - Hino Motors HINO 155 series Workshop Manual

2–822

INSPECTION PROCEDURE: P1601

1

Check the injector replaced record

Has the injector been replaced in the past?
(Replacement history exists or is unclear.)
Go to step 3.
Check the QR CODE 1 [HINO DX Ⅱ ]
2
Has DTC P1601 been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
1. Check the injector replaced record.
YES
1. Re-input the registration QR code date of the service server.
2. Erase the DTC memory, and check again DTC code. Check that
DTC code P1601 is not displayed.
SHTS021270300737
YES
NO
(No replacement history)
Go to step 2.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.