2–756
5.
Symptoms on the vehicle when the DTC is set
<Symptoms on the vehicle due to backup control (fail safe function)>
• –
<Symptoms on the vehicle due to malfunction>
• –
6.
Pre-inspection work
• Check that the battery voltage is in the normal range.
7.
After-inspection work
• Clear all past DTCs.
• Check that no DTC is stored after test drive.
8.
Estimated failure factors
• Abnormal resistance of sensor
• Harness disconnection or short-circuit
• Looseness or poor contact of connector.
• Malfunction of engine ECU sensor power supply or internal circuit.
ENGINE (J05E)/TROUBLESHOOTING