Inspection Procedure: P006F - Hino Motors HINO 155 series Workshop Manual

2–144

INSPECTION PROCEDURE: P006F

1
Check the DTC detected 1 (Engine ECU)
Has DTC U010C been detected?
Go to diagnosis procedure of the related
DTC.
After repair, go to step 2.
2
Check the DTC detected 2 (Engine ECU)
Has DTC P006F been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
Connect the vehicle to HINO DX Ⅱ .
1.
2. Set the starter key to the "ON" position.
3. Select [Engine] and check if any DTC other than P006F (U010C)
has been detected.
SHTS021270300134
YES
1. Set the starter key to the "ON" position.
2. Select [Engine] and check if P006F has been detected.
SHTS021270300135
YES
NO
Go to step 3.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.