Hino Motors HINO 155 series Workshop Manual page 279

13
Check the DTC detected (Engine ECU)
Has DTC P0115 been detected?
Replace the engine ECU.
Perform "After-inspection work" of INFOR-
MATION section.
ENGINE (J05E)/TROUBLESHOOTING
Warm up the engine. (engine coolant temperature: 80 C {176 F}
1.
or more)
2. Stop the engine and set the starter key to the "LOCK" position.
Connect the vehicle to HINO DX Ⅱ .
3.
4. Set the starter key to the "ON" position.
5. Select [Engine] and check if P0115 has been detected.
SHTS021270300223
YES NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
2–243