Inspection Procedure: P0610; Check The Dtc Detected 1 (Engine Ecu); Inspect The Vehicle Information (Hino Dx Ⅱ) - Hino Motors HINO 155 series Workshop Manual

2–628

INSPECTION PROCEDURE: P0610

1

Check the DTC detected 1 (Engine ECU)

Has a DTC other than P0610 been detected?
Go to the diagnostic procedure of a related
DTC.
Inspect the vehicle Information [HINO DX Ⅱ ]
2
Is the vehicle Information (VIN) in the vehicle control ECU correct?
Go to step 4.
ENGINE (J05E)/TROUBLESHOOTING
1. Set the starter key to the "LOCK" position.
Connect the vehicle to HINO DX Ⅱ .
2.
3. Set the starter key to the "ON" position.
4. Select [Engine] and check if any DTC other than P0610 (for exam-
ple, U1001, U110A) has been detected.
SHTS021270300571
YES
1. Select [VCS] and read the vehicle information (VIN) written in the
Vehicle control ECU at system fix.
2. Compare the data with the vehicle's VIN LABEL, and check if the
vehicle information (VIN) that has been written to the Vehicle con-
trol ECU is correct.
SHTS021270300572
YES
NO
Go to step 2.
NO
Go to step 3.