4.
Indication, warning or system control regulation when the DTC is set.
• MIL: ON
• SVS light: OFF
• Fuel injection limit
5.
Symptoms on the vehicle when the DTC is set
<Symptoms on the vehicle due to backup control (fail safe function)>
• Engine output is insufficient.
<Symptoms on the vehicle due to malfunction>
• –
6.
Pre-inspection work
• Check that the battery voltage is in the normal range.
7.
After-inspection work
• Clear all past DTCs.
• Check that no DTC is detected after test drive.
8.
Estimated failure factors
• Damaged EGR actuator motor
ENGINE (J05E)/TROUBLESHOOTING
2–535