Hino Motors HINO 155 series Workshop Manual page 711

5
Check the DTC detected 5 (Engine ECU)
Has DTC P0652 been detected?
After connecting the connector, go to step 6.
ENGINE (J05E)/TROUBLESHOOTING
1. Erase the trouble history and set the starter key to the "LOCK"
position.
2. Disconnect the aftertreatment fuel injection line pressure sensor.
3. Set the starter key to the "ON" position.
4. Select [Engine] and check if P0652 has been detected.
SHTS021270300618
YES NO
Replace the aftertreatment fuel injection line
pressure sensor.
Perform "After-inspection work" of INFOR-
MATION section.
2–675