Inspection Procedure: P00Af - Hino Motors HINO 155 series Workshop Manual

INSPECTION PROCEDURE: P00AF

1
Check the DTC detected (Engine ECU) 1
Has a DTC other than P00AF been detected?
Go to the diagnostic procedure of a related
DTC.
After the repair, go to step 2.
2
Check the DTC detected (Engine ECU) 2
Has DTC P00AF been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
Connect the vehicle to HINO DX Ⅱ .
1.
2. Set the starter key to the "ON" position.
3. Select [Engine] and check if P00AF (for example, U010C) has
been detected.
SHTS021270300181
YES
1. Set the starter key to the "ON" position.
2. Select [Engine] and check if P00AF has been detected.
SHTS021270300182
YES
NO
Go to step 3.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
2–197