Inspect Disconnection Of The Pto Accelerator Sensor Harness - Hino Motors HINO 155 series Workshop Manual

2–740
5

Inspect disconnection of the PTO accelerator sensor harness

B
V71
V45
B
Do the measurements meet the standard value?
Go to step 6.
ENGINE (J05E)/TROUBLESHOOTING
1. Connect the PTO accelerator sensor connector.
2. Use the electrical tester to measure the resistance between the
V68
terminals of the engine ECU (signal check harness).
Starter key: LOCK
V68
SHTS021270300673
YES
Measurement Tester
conditions connections
Engine ECU (sig-
nal check har-
ness)
VPA1 (V68) –
VCP1 (V71)
VPA1 (V68) –
EPA (V45)
Repair or replace the harness.
Perform "After-inspection work" of INFOR-
MATION section.
Standard values
More than 2 
NO