Hino Motors HINO 155 series Workshop Manual page 441

8
Replace the common rail assembly
Has DTC (P026C or P026D) been detected?
Go to step 9.
ENGINE (J05E)/TROUBLESHOOTING
1. Set the starter key to the "LOCK" position.
2. Replace common rail assembly.
Perform the engine warm up. (engine coolant temperature: 80 C
3.
{176 F} or more)
4. Stop the engine.
5. Set the starter key to the "ON" position.
6. Select [Engine] and check if the DTC (P026C or P026D) has been
SHTS021270300368
detected.
YES NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
2–405