Inspection Procedure: P0047 - Hino Motors HINO 155 series Workshop Manual

2–132

INSPECTION PROCEDURE: P0047

1
Check the DTC detected (Engine ECU)
Has DTC U010C been detected?
Go to diagnosis procedure of a related DTC.
Go to step 2 after repair.
2
Check the DTC detected (Engine ECU)
Has DTC P0047 been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
Connect the vehicle to HINO DX Ⅱ .
1.
2. Set the starter key to the "ON" position.
3. Select [Engine] and check if any DTC other than P0047 (for exam-
ple U010C) has been detected.
HINT
Due to CAN communication failure P0047 may have been
detected.
SHTS021270300122
YES
1. Set the starter key to the "ON" position.
2. Select [Engine] and check if P0047 has been detected.
SHTS021270300123
YES
NO
Go to step 3.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.