Inspection Procedure: P062F - Hino Motors HINO 155 series Workshop Manual

2–646

INSPECTION PROCEDURE: P062F

1
Check the DTC detected 1 (Engine ECU)
Has a DTC other than P062F been detected?
Go to the diagnostic procedure of a related
DTC.
After the repair, go to step 2.
2
Check the DTC detected 2 (Engine ECU)
Has DTC P062F been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
Connect the vehicle to HINO DX Ⅱ .
1.
2. Set the starter key to the "ON" position.
3. Select [Engine] and check if any DTC other than P062F (for exam-
ple, U010C) has been detected.
SHTS021270300587
YES
1. Set the starter key to the "ON" position.
2. Select [Engine] and check if P062F has been detected.
SHTS021270300588
YES
NO
Go to step 3.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.