Inspection Procedure: P0045 - Hino Motors HINO 155 series Workshop Manual

2–128

INSPECTION PROCEDURE: P0045

Check the DTC detected 1 [HINO DX Ⅱ ]
1
Has DTC other than P0045 (for example U010C) been detected?
Go to diagnosis procedure of a related DTC.
Go to step 2 after repair.
Check the DTC detected 2 [HINO DX Ⅱ ]
2
Has DTC P0045 been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
Connect the vehicle to HINO DX Ⅱ .
1.
2. Set the starter key to the "ON" position.
3. Select [Engine] and check if any DTC other than P0045 (for exam-
ple U010C) has been detected.
SHTS021270300117
YES
1. Set the starter key to the "ON" position.
2. Select [Engine] and check if P0045 has been detected.
SHTS021270300118
YES
NO
Go to step 3.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.