Hino Motors HINO 155 series Workshop Manual page 692

2–656
5
Check the DTC detected 5 (Engine ECU)
Has DTC P0642 been detected?
Connect the connector, and go to step 6.
ENGINE (J05E)/TROUBLESHOOTING
1. Erase the trouble history and set the starter key to the "LOCK"
position.
2. Disconnect the engine speed sub sensor (camshaft position sen-
sor) connector.
3. Set the starter key to the "ON" position.
4. Select [Engine] and check if P0642 has been detected.
SHTS021270300599
YES NO
Replace the engine speed sub sensor (cam-
shaft position sensor).
Perform "After-inspection work" of INFOR-
MATION section.