Hino Motors HINO 155 series Workshop Manual page 439

4
Inspect the pre fuel filter
Was any failure found?
Replace the pre fuel filter.
Go to step 5 after replacement.
5 Check the DTC detected (Engine ECU)
Has DTC (P026C or P026D) been detected?
Go to step 6.
ENGINE (J05E)/TROUBLESHOOTING
1. Check that the pre fuel filter is not dirty or clogged or damaged.
YES
Perform the engine warm up. (engine coolant temperature: 80 C
1.
{176 F} or more)
2. Stop the engine.
3. Set the starter key to the "ON" position.
4. Select [Engine] and check if the DTC (P026C or P026D) has been
detected.
SHTS021270300365
YES
NO
Go to step 5.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
2–403