Hino Motors HINO 155 series Workshop Manual page 201

3
Inspect the intercooler outlet temperature sensor unit
THG E2
Do the measurements meet the standard value?
Go to step 4.
ENGINE (J05E)/TROUBLESHOOTING
1. Set the starter key to the "LOCK" position.
2. Disconnect the intercooler outlet temperature sensor connector.
3. Use the electrical tester to measure the resistance between the
terminals of the intercooler outlet temperature sensor.
Starter key: LOCK
SHTS021270300151
YES
Measurement Tester
conditions connections
Intercooler outlet
temperature sen-
sor
THG – E2
Replace the intercooler outlet temperature
sensor.
Perform "After-inspection work" of INFOR-
MATION section.
2–165
Standard values
20 C {68 F}:
7.336 – 5.794 k
50 C {122 F}:
2.435 – 1.994 k
NO