P0630: Vin Not Programmed Or Mismatch; Dtc: P0630 - Hino Motors HINO 155 series Workshop Manual

2–648

DTC: P0630

P0630: VIN Not Programmed or Mismatch

INFORMATION
<Vehicle control ECU>
1. Technical description
• Reception of vehicle information (VIN) is detected.
<Description of malfunction>
• Vehicle information is not received or may be faulty.
2. DTC set condition
(1) DTC detection condition
• Starter key "ON".
• Battery voltage is in the range of 10 V to 16 V.
(2) Judgement criteria
• Vehicle information is not written.
• Vehicle information was upgraded.
• Vehicle information is not valid (did not use a code)
3. Reset condition
• After restoration to normal condition and starter key "LOCK"
4. Indication, warning or system control regulation when the DTC is set.
• MIL: OFF
• SVS light: ON
5. Symptoms on the vehicle when the DTC is set
<Symptoms on the vehicle due to backup control (fail safe function)>
• –
<Symptoms on the vehicle due to malfunction>
• –
6. Pre-inspection work
• Check that the battery voltage is in the normal range.
7. After-inspection work
• Clear all past DTCs.
• Check that no DTC is detected after test drive.
ENGINE (J05E)/TROUBLESHOOTING
CAN communication
EN01H02127030602016106
<Engine ECU>
SHTS021270300590