6
Inspect disconnection of the oil pressure switch harness
D
E41
Do the measurements meet the standard value?
Replace the engine ECU.
Perform "After-inspection work" of INFOR-
MATION section.
ENGINE (J05E)/TROUBLESHOOTING
1.
Use the electrical tester to measure the resistance between the
terminals of the engine ECU and oil pressure switch vehicle side
connector.
OIL
E2R
Starter key: LOCK
SHTS021270300542
YES
Measurement
Tester
conditions
connections
Engine ECU (sig-
nal check har-
ness) – Oil
pressure switch
vehicle side con-
nector
OSW (E41) – S
Repair or replace the harness.
Perform "After-inspection work" of INFOR-
MATION section.
2–591
Standard values
Less than 1
NO