Inspection Procedure: P0521; Check The Engine Oil Level; Check For Engine Oil Leaks - Hino Motors HINO 155 series Workshop Manual

2–584

INSPECTION PROCEDURE: P0521

1

Check the engine oil level

Engine damage will occur.
Rivet
FULL
Gauge end
Was any failure found?
Adjust the engine oil quantity so that it is
within the stipulated value.
Change the oil if it is dirty.
Perform "After-inspection work" of INFOR-
MATION section.
2

Check for engine oil leaks

Was any failure found?
Repair the faulty part.
Perform "After-inspection work" of INFOR-
MATION section.
ENGINE (J05E)/TROUBLESHOOTING
1.
2.
Oil level gauge
ADD
Preferred level
SHTS021270300535
YES
1.
YES
Check the oil level gauge and make sure the engine oil quantity is
within the stipulated value.
Check the engine oil condition (dirt, viscosity).
Go to step 2.
Make sure there is no oil leaking from the engine unit or from
around the oil pressure switch.
Go to step 3.
NO
NO