Inspection Procedure: P0027; Check The Dtc Detected 1 (Hino Dx Ⅱ); Inspect The Exhaust Brake Valve Piping And Hose - Hino Motors HINO 155 series Workshop Manual

INSPECTION PROCEDURE: P0027

Check the DTC detected 1 [HINO DX Ⅱ ]
1
Has a DTC other than P0027 been detected?
Perform the relevant DTC-specific trouble-
shooting.
2

Inspect the exhaust brake valve piping and hose

Was any failure found?
Connect securely, repair if needed.
ENGINE (J05E)/TROUBLESHOOTING
1. Set the starter key to the "LOCK" position.
Connect the vehicle to HINO DX Ⅱ .
2.
3. Set the starter key to the "ON" position.
4. On the screen of the diagnostic system, select [Engine], and check
any DTC listed below other than P0027.
- P0101, P04D5, P2101, P2526
SHTS021270300106
YES
1. Check the piping and hose, connected to the exhaust brake valve,
for bend, clogging, and crack.
YES
NO
Go to step 2.
NO
Go to step 3.
2–117