Hino Motors HINO 155 series Workshop Manual page 446

2–410
Flow-Cut off test
<Cylinder cut-off test>
By stopping fuel injection for one of the cylinders of an engine normally running with four, this test detects combustion
abnormalities of each cylinder.
<Purpose>
Evaluation of combustion abnormalities in the cylinders by using sound differences.
<Know-how & examples>
Detect combustion abnormalities of any cylinder from differences in the sound and perform the required corrections.
1
Cylinder cut-off test
Active test Setting
ENGINE (J05E)/TROUBLESHOOTING
1. Start the engine and use the cruise control function to run the
engine at 1,500 r/min.
2. Check that the engine sound at the time of before cut-off test nor-
mal operation. (The sound at this time shall be α.)
Data monitor and Active test
3. Select [Data monitor and Active test].
SHTS021270300374