Inspection Procedure: P003A - Hino Motors HINO 155 series Workshop Manual

INSPECTION PROCEDURE: P003A

Check the DTC detected 1 [HINO DX Ⅱ ]
1
Has a DTC other than P003A been detected?
Go to diagnosis procedure of a related DTC.
After repairing, go to step 2.
Check the DTC detected 2 [HINO DX Ⅱ ]
2
Has DTC P003A been detected?
Go to step 3.
ENGINE (J05E)/TROUBLESHOOTING
Connect the vehicle to HINO DX Ⅱ .
1.
2. Set the starter key to the "ON" position.
3. Select [Engine] and check if any DTC other than P003A (for exam-
ple, U010C) has been detected.
SHTS021270300112
YES
1. Set the starter key to the "ON" position.
2. Select [Engine] and check if P003A has been detected.
SHTS021270300113
YES
NO
Go to step 3.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
2–123