Hino Motors HINO 155 series Workshop Manual page 482

2–446
5 Inspect for short-circuit of the engine speed main sensor (crankshaft position sensor) har-
ness
E52
E72
Do the measurements meet the standard value?
Go to step 6.
ENGINE (J05E)/TROUBLESHOOTING
1.
D
SHTS021270300411
YES
Use the electrical tester to measure the resistance between the
terminals of the engine ECU and ground.
Measurement
conditions connections
Engine ECU (sig-
nal check har-
ness)
NE+ (E52) –
Starter key: LOCK
Ground
NE- (E72) –
Ground
Repair or replace the harness.
Perform "After-inspection work" of INFOR-
MATION section.
Tester
Standard values
 
NO