Inspection Procedure: P0Ca1 - Hino Motors HINO 155 series Workshop Manual

INSPECTION PROCEDURE: P0CA1

Check the DTC detected [HINO DX Ⅱ ]
1
Has DTC P0CA1 been detected?
Go to DTC-specific troubleshooting for the
hybrid system (HV ECU).
ENGINE (J05E)/TROUBLESHOOTING
1. Set the starter key to the "LOCK" position.
Connect the diagnostic system (HINO DX Ⅱ ) to the vehicle.
2.
3. Set the starter key to the "ON" position.
4. On the screen of the diagnostic system, select [Engine], and read
the detected DTC.
SHTS021270300669
YES NO
Procedure completed.
2–735