Inspect The Exhaust Gas Temperature Sensor - Hino Motors HINO 155 series Workshop Manual

4
Inspect the exhaust gas temperature sensor (DPF inlet)
Was any failure found?
Clean the sensing area and install the sensor
properly.
If damage is found, replace the sensor.
ENGINE (J05E)/TROUBLESHOOTING
1. Inspect the exhaust gas temperature sensor (DPF inlet) for
improper installation.
2. Check the sensing area of the exhaust gas temperature sensor
(DPF inlet) for dirt, clogging, and damage.
YES NO
Replace the DPR.
2–533