2–734
DTC: P0CA1
P0CA1: HV MOTOR system failure
INFORMATION
1.
Technical description
<Description of malfunction>
• The engine ECU detected malfunction in the hybrid motor.
2.
DTC set condition
(1)
DTC detection condition
• –
(2)
Judgement criteria
• –
3.
Reset condition
• Immediately after normal status is resumed
4.
Indication, warning or system control regulation when the DTC is set.
• MIL: OFF
• SVS light: OFF
5.
Symptoms on the vehicle when the DTC is set
<Symptoms on the vehicle due to backup control (fail safe function)>
• –
<Symptoms on the vehicle due to malfunction>
• –
6.
Pre-inspection work
• Check that the battery voltage is in the normal range.
7.
After-inspection work
• Clear all past DTCs.
• Check that no DTC is detected after test drive.
8.
Estimated failure factors
• –
ENGINE (J05E)/TROUBLESHOOTING
EN01H02127030602016122