Disconnection In Wire Harness Of Diesel Throttle Position Sensor 1 - Hino Motors HINO 155 series Workshop Manual

2–274
7 Inspect for disconnection in the wire harness of the diesel throttle (intake throttle valve) posi-
tion sensor 1
C
E33
C
E33
D
E62
Do the measurements meet the standard value?
Go to step 8.
ENGINE (J05E)/TROUBLESHOOTING
1. Connect the intake throttle valve position sensor 1 connector.
D
E62
2. Use the electrical tester to measure the resistance between the
terminal of the engine ECU (signal check harness).
Starter key: LOCK
D
E57
E57
SHTS021270300253
YES
Measurement Tester
conditions connections
Engine ECU (sig-
nal check har-
ness)
(1) VC2 (E33) –
VTA1 (E62)
(2) VC2 (E33) –
E3 (E57)
(3) VTA1 (E62) –
E3 (E57)
Repair or replace the harness.
Perform "After-inspection work" of INFOR-
MATION section.
Standard values
(1) 2  or more
(2) 3 k
(3)  
NO