Reprogram The Vehicle Control Ecu (Hino Dx Ⅱ); Reprogram The Engine Ecu (Hino Dx Ⅱ) - Hino Motors HINO 155 series Workshop Manual

Reprogram the vehicle control ECU [HINO DX Ⅱ ]
3
Has DTC P0610 been detected?
Replace the vehicle control ECU.
Perform "After-inspection work" of INFOR-
MATION section.
Reprogram the Engine ECU [HINO DX Ⅱ ]
4
Has DTC P0610 been detected?
Replace the engine ECU.
Perform "After-inspection work" of INFOR-
MATION section.
ENGINE (J05E)/TROUBLESHOOTING
Use HINO DX Ⅱ , and perform [Reprograming] from vehicle control
1.
ECU.
Select [Engine] from the HINO DX Ⅱ and read the DTC that has
2.
been detected.
SHTS021270300573
YES
Use HINO DX Ⅱ , and perform [Reprograming] from engine ECU.
1.
Select [Engine] from the HINO DX Ⅱ , and read the DTC that has
2.
been detected.
SHTS021270300574
YES
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
NO
Procedure completed.
Perform "After-inspection work" of INFOR-
MATION section.
2–629