Inspection Procedure: P0101; Inspect The Air Cleaner Element; Check The Intake System - Hino Motors HINO 155 series Workshop Manual

INSPECTION PROCEDURE: P0101

1

Inspect the air cleaner element

Was any failure found?
Clean or replace the air cleaner element.
Perform "After-inspection work" of INFOR-
MATION section.
2

Check the intake system

Was any failure found?
Repair or replace the intake system hoses.
Perform "After-inspection work" of INFOR-
MATION section.
ENGINE (J05E)/TROUBLESHOOTING
1. Check the air cleaner element is dirty, clogged or damaged.
2. Make sure the element is a Hino genuine part.
YES
1. Check the intake hose and verify that there are no disconnections,
clogging, punctures, or cracks.
2. Check the breather hose and verify that there are no disconnec-
tions, clogging, punctures, or cracks.
3. Check the intercooler hose and verify that there are no disconnec-
tions, clogging, punctures, or cracks.
YES
NO
Go to step 2.
NO
Go to step 3.
2–201