Inspection Procedure: P0506 - Hino Motors HINO 155 series Workshop Manual

2–576

INSPECTION PROCEDURE: P0506

1
Check the DTC detected (Engine ECU)
Has a DTC other than P0506 been detected?
Go to the diagnostic procedure of a related
DTC.
ENGINE (J05E)/TROUBLESHOOTING
1. Set the starter key to the "LOCK" position.
Connect the vehicle to HINO DX Ⅱ .
2.
3. Set the starter key to the "ON" position.
4. Select [Engine] and check if any DTC other than P0506 has been
detected.
SHTS021270300526
YES NO
Go to step 2.